03: Lighting Class: Lighting Principle Three: The Color of Light

by | Jan 1, 2017 | LE News and Info

LIGHTING PRINCIPLE THREE: THE COLOR OF LIGHT

We see light usually as a white source, or at least a neutral source.

It isn’t. neutral, it has a color to it and that color can influence all the parts of your image, from shadows to highlights. We don’t see the color of light because our brain changes it to a neutral “white” color as we see it.

Here is a wonderful article that explains the way that the color of light affects your image. Read it now.

When we look at the color of the scene in front of us we can change it globally by changing our color balance in the camera, or using a filter. What “globally’ means is that everything in the photo is changed to the same setting. All the colors are altered by this global change to the color of the light.

On the left is a photograph taken near Mable Canyon. The sun was quite bright, and there was a bit of warmth to the image because of all the warm browns and oranges of the topography all around us.

This image is as shot. I have applied global changes to the color of the light source so you can see what that does to the image.

Below from left to right:

Daylight / Shade / Tungsten / Flourescent

DAYLIGHT

Changing from As Shot to Daylight shows very little difference, although the daylight color balance makes it a bit more warm.

SHADE

Since the color of the light in the shade is a bit more blue, we add some warmth to the overall image to compensate for it. In this shot you can see the global warmth is not going to work because the image was not shot in the shade.

TUNGSTEN

Tungsten light is very orange, so when we apply a tungsten color balance to a shot that is not too orange, we get this very blue looking shot. This is a good reminder of just how ‘warm’ tungsten light is if it takes this much blue to make it correct.

FLUORESCENT

Fluorescent light is blue/green so it makes it difficult to compensate for. In this application of the fluorescent color balance, we can see the sky going a deep blue, while the desert mountains behind become more magenta.

LOCAL LIGHT SOURCE MATCHED TO AMBIENT

Working with a secondary light source that may be a different color presents us with a challenge. We cannot change the image globally because adding a correction to the image to correct for the different light source will affect the entire image.

We must then change the different light source to the ambient (or overwhelming light) in order to ‘balance’ the subject in the ambient setting.

The ambient setting is the overwhelming light that we usually cannot change: the sun, a large warehouse, a home. Bringing in our own lights means we must know how to match what we bring to what is there.

ASSIGNMENTS FOR THIS CLASS:

  1. Using the color settings on your camera, take the same image with each of them. Shoot with Daylight, Shade, Tungsten, Flourescent at least and do this in places where those colors exist. In other words, shoot some images outside, inside with regular household lamps, and some place that has Flourescent. (NOTE: Many big box stores use a light source known as Mercury Vapor. Mercury Vapor is blue/green so it is very difficult to adequately address. We can add magenta to offset the green, but that turns the blue part of the light to purple. If we address the blue with something warm, we add that to the green part of the light.For Mercury Vapor correction, try “auto” on your camera setting. It is the best I have found for correcting most of that blue/green color shift.
  2. Using a strobe (speedlight), take a photograph of someone while the sun is going down behind them. Do not alter the strobe setting, just let it keep making the shot as the light turns warmer and warmer. You will then see how “blue” the light source seems coming from the flash.You may have to change the settings as the light gets dimmer, but I think you will see the changes pretty well.

We will be addressing color balance in all of the upcoming classes.

In Search Of…

In Search Of…

by | Mar 8, 2018 | | 0 Comments

IN SEARCH OF   Tuesday morning I got up later than expected for my drive to San Diego. My short journey/road trip was to see Dan Winters, a favorite photographer of mine, do a talk on his photography.   The venue was the Museum of Photographic Arts in Balboa Park, so...

A Premium Filter System from K&F Concepts

A Premium Filter System from K&F Concepts

by | Jan 5, 2018 | | 0 Comments

Filters come in all shapes and sizes... and qualities. This is a premium product, clear, well made, and a bit thinner than most of the cheap filters out there. I use them when I am on the motorcycle, and when trekking. Usually I take them off when I shoot,...

BLACK FRIDAY IS FREE at Lighting Essentials

BLACK FRIDAY IS FREE at Lighting Essentials

by | Nov 21, 2017 | | 0 Comments

SPEND BLACK FRIDAY WITH DON GIANNATTI Well, that was a lot of fun. Had a few technical glitches, learned what not to do next time and how to what I want to do better. Next time coming soon. Really soon. We recorded each session and the videos are here on the page for...

8 Week Video Class Five

by | Nov 6, 2017 | | 0 Comments

Assembling Assets: A Roll / B Roll / Audio This week we are going to go a little deeper into the shoot experience. The next video we do will be one a bit more advanced than what we just did. We are going to blend several features together to make a video...

The Image Is The Thing

The Image Is The Thing

by | Oct 20, 2017 | | 0 Comments

Becoming a “Photographer” - or being a “Photographer”… what does that mean, really? Does it mean that you now have a top of the line camera? Does it mean a bag of lenses? Does it mean an awesome set of studio lights? Or a light meter? Boom? Storbs? (inside joke,...